The Metric System

The forum for ranting, raving, complaining and praising
User avatar
vinsanity
Chili dog truther
Posts: 8836
Joined: July 3 06, 2:19 pm
Location: Indianapolis

Re: The Metric System

Post by vinsanity »

cards2468 wrote:go for it, I just don't see the benefit when really all we're changing is signs and labels. Just seems like a waste of money when industry won't change anyway (even outside the aerospace industry many companies won't pay for the conversion)
So the only difference between the US and Europe in terms of units of measure is road signs and labels?

Maybe if Americans understood metric measurements better they'd be more likely to purchase goods from over-seas, increasing global competition in many markets - like automobiles. With the increase in competition American auto companies would pay for conversion because their main customer base uses metric as well as the rest of the world.

When American cars sell on foreign soil are they Imperial or Metric units of measure? If it's Metric, it shouldn't be that difficult to change. If it's Imperial, well maybe that's a big reason American car companies do so poorly overseas?

American's already use inches and mm's on home tools and some other basic units of measure. They have exposure to both. There's little reason why many other industries can't phase in metric if it became the new standard. They don't want to convert to metric if their employees/customers don't get it. They don't wanna spend the money on converting so they likely spend the money on lobbying against it. But if congress said 'Ok, in 2020 we're all 100% metric. If private industry doesn't want to fine, but we'll start teaching metric more in schools, it'll become part of high school proficiency tests. Road signs and standards are metric' then they have a customer base who will understand metric, they'll have employees who'd rather use metric and have much more incentive to change.

TimeForGuinness
Hall Of Famer
Posts: 20007
Joined: April 18 06, 7:38 pm

Re: The Metric System

Post by TimeForGuinness »

Pfft, you wouldn't have to buy all new equipment, you'd just have to relabel/update the drawings...it's the same distance/weight/etc.

User avatar
cards2468
Hall Of Famer
Posts: 14745
Joined: October 28 06, 11:10 pm
Location: LOVE IT OR LEAVE IT

Re: The Metric System

Post by cards2468 »

TimeForGuinness wrote:Pfft, you wouldn't have to buy all new equipment, you'd just have to relabel/update the drawings...it's the same distance/weight/etc.
as well as all tolerances

When working with tolerances of +/- .0001 inches, you can't really afford to have round off errors from changing units.

Of course this also means all new measuring instrumentation.

EDIT* I realize the text is blue, just pointing out why it is blue to those who might not understand.

User avatar
Popeye_Card
GRB's most intelligent & humble poster
Posts: 31094
Joined: April 17 06, 11:25 am

Re: The Metric System

Post by Popeye_Card »

I could be wrong, but I'm thinking Ford and GM actually do pretty well overseas. Except in Japan, of course. I don't think there is any issues with units there.

User avatar
cards2468
Hall Of Famer
Posts: 14745
Joined: October 28 06, 11:10 pm
Location: LOVE IT OR LEAVE IT

Re: The Metric System

Post by cards2468 »

Popeye_Card wrote:I could be wrong, but I'm thinking Ford and GM actually do pretty well overseas. Except in Japan, of course. I don't think there is any issues with units there.
I think American auto companies do better over seas than they do in America. Heck, in Canada it seemed like every car was from an American manufacturer.

User avatar
vinsanity
Chili dog truther
Posts: 8836
Joined: July 3 06, 2:19 pm
Location: Indianapolis

Re: The Metric System

Post by vinsanity »

Popeye_Card wrote:I could be wrong, but I'm thinking Ford and GM actually do pretty well overseas. Except in Japan, of course. I don't think there is any issues with units there.
It appears they are either converted or produced in foreign countries so units isn't the issue.

But I was under the impression we imported/bought foreign at a much, much higher rate than foreign countries bought American. I've been wrong before.

Canada on the other hand can get American cars easier than other foreign vehicles,and it's not exactly 'over-seas'.

User avatar
cards2468
Hall Of Famer
Posts: 14745
Joined: October 28 06, 11:10 pm
Location: LOVE IT OR LEAVE IT

Re: The Metric System

Post by cards2468 »

My main problem with American cars is that there's alot of components from both systems. I don't think they make fuel pumps in anything other than metric, and then bore and stroke are typically measured in centimeters with displacement then being in cubic centimeters (easily converted to liters). I think the auto industry is trying to completely convert. Society of Automotive Engineers now goes by metric. In 2006 when I went to Detroit for Formula SAE, they allowed you to specify your system in the spec sheet they would have you fill out. In 2008 they required you to put everything in metric. Our car was completely designed using pounds and inches (we even modified our Honda engine and Bosch fuel pump to fit standard nuts when mounting it). A judge at the competition did not like this (judge hailed from Belgium). We told him that we're from an aerospace school and professors did not like us using metric. He said he can understand, but still did not approve. It was true though, a portion of the car's design was being used as a Mechanical Engineering senior design project, and senior design projects at the first ever school of aviation are going to be in standard no matter what.

Really, I don't care if it's pounds/inches or kg/meters, just as long as you're not throwing in feet and miles it makes no difference, just be consistent. For us it just meant we had to throw in an extra variable into a lot of things that wasn't a factor of 10 when doing things like feet/second (doing impact testing on the crash attenuator) mph (calculating wheel loading, suspension travel, etc.). And really all our calculations are done in a program we created where there's a variable for the factor that we define at the start of the program.

User avatar
wart57
just can't quit you.
Posts: 25076
Joined: April 18 06, 4:33 pm
Location: Lost

Re: The Metric System

Post by wart57 »

150 mm sounds so much better than 6 inches....

Post Reply