Rant: Heat Transfer

The forum for ranting, raving, complaining and praising
User avatar
Swirls
gone fission
Posts: 8299
Joined: December 11 07, 4:15 pm
Location: South Korea

Re: Rant: Heat Transfer

Post by Swirls »

It's not so much that we have to take the refresher course that is annoying and aggravating. What's aggravating is that we do these courses over like 2-3 days. We sit in a classroom for two days while an instructor cruises through 300 PowerPoint slides, then we have to review the slides and a 300 page student guide before our exam the next morning. You get under an 80%, you fail.

What's more frustrating is that since Constellation Energy operates a fleet of nuclear plants (Nine Mile Point in Oswego, NY, R.E. Ginna in Rochester, NY, and Calvert Cliffs in Lusby, MD), each plant site had their own method for presenting this training to their new engineers. So my class is a pilot session where they will change the teaching method for each course, and then they'll use our classes feedback to determine how to set up a common training program for all three nuclear sites.

So we'll go from having all PowerPoint slides to having no slides and a huge student handbook to having nothing but an online review and exam to having all three. It makes it very hard to come to a common way of studying, because it is always changing.

In college, you learn how to tweak your study habits/schedule based on how your instructor teaches. Sometimes it may take a few weeks or a month to finally get in the groove on how said professor teaches the information, but after that you're set for the rest of the semester and any other time you have that professor for another class. Mine is always changing. Plus it doesn't help that half of our courses are taught by an instructor, the other half are taught by subject matter experts for each system that have no clue at all on how to teach.

User avatar
wart57
just can't quit you.
Posts: 25076
Joined: April 18 06, 4:33 pm
Location: Lost

Re: Rant: Heat Transfer

Post by wart57 »

Mrs. Wart is always cold, and I am always hot. Unfortunately, with her being 7 months preggers, and being of a particularly foul temperament, not much heat transfer is going on unless she is giving me heat for not washing the dishes in the approved Mrs. Wart fashion.

User avatar
Cole Burns
Perennial All-Star
Posts: 3749
Joined: July 30 06, 10:53 am
Location: I'm not here.

Re: Rant: Heat Transfer

Post by Cole Burns »

I thought this was going to be about sitting in a chair that someone had recently farted in. Now that's a rant I can get behind.

User avatar
Swirls
gone fission
Posts: 8299
Joined: December 11 07, 4:15 pm
Location: South Korea

Re: Rant: Heat Transfer

Post by Swirls »

Cole Burns wrote:I thought this was going to be about sitting in a chair that someone had recently farted in. Now that's a rant I can get behind.
Well, there are three fresh college grads in our class who sit together and are guaranteed to rip ass several times a day and think nothing of it whatsoever. It is also guaranteed that at least one of them will rip ass so bad that day that half of the classroom clears out and scoots their chairs to the edges of the walls. In fact, last week one wafted so far that it caught the sensitive nose of our instructor, who proceeded to give us a 10 minute break to let the classroom dissipate.

User avatar
StatmanCrothers
Perennial All-Star
Posts: 6461
Joined: April 17 06, 6:50 am
Location: Boston burbs
Contact:

Re: Rant: Heat Transfer

Post by StatmanCrothers »

thanks to heat transfer class, I now know to place the warm cans of soda far from each other in the fridge so they can't keep each other warm, and they will get cold faster

User avatar
AdmiralKird
MBA, CPA, CFA, CFP, JD, PE, MD
Posts: 10179
Joined: March 7 07, 4:50 pm
Location: Tycho Crater, Luna

Re: Rant: Heat Transfer

Post by AdmiralKird »

StatmanCrothers wrote:thanks to heat transfer class, I now know to place the warm cans of soda far from each other in the fridge so they can't keep each other warm, and they will get cold faster
I never realized this, although I usually just place them next to my heart and they get cold pretty quickly.

AWvsCBsteeeerike3
"I could totally eat a pig butt, if smoked correctly!"
Posts: 27578
Joined: August 5 08, 11:24 am
Location: Thinking of the Children

Re: Rant: Heat Transfer

Post by AWvsCBsteeeerike3 »

Swirls wrote:It's not so much that we have to take the refresher course that is annoying and aggravating. What's aggravating is that we do these courses over like 2-3 days. We sit in a classroom for two days while an instructor cruises through 300 PowerPoint slides, then we have to review the slides and a 300 page student guide before our exam the next morning. You get under an 80%, you fail.

What's more frustrating is that since Constellation Energy operates a fleet of nuclear plants (Nine Mile Point in Oswego, NY, R.E. Ginna in Rochester, NY, and Calvert Cliffs in Lusby, MD), each plant site had their own method for presenting this training to their new engineers. So my class is a pilot session where they will change the teaching method for each course, and then they'll use our classes feedback to determine how to set up a common training program for all three nuclear sites.

So we'll go from having all PowerPoint slides to having no slides and a huge student handbook to having nothing but an online review and exam to having all three. It makes it very hard to come to a common way of studying, because it is always changing.

In college, you learn how to tweak your study habits/schedule based on how your instructor teaches. Sometimes it may take a few weeks or a month to finally get in the groove on how said professor teaches the information, but after that you're set for the rest of the semester and any other time you have that professor for another class. Mine is always changing. Plus it doesn't help that half of our courses are taught by an instructor, the other half are taught by subject matter experts for each system that have no clue at all on how to teach.
Yeah, regarding the study habits/how you learn, that's certainly true. I was just giving you [expletive] that you were pissed about having to get a 90% without drawing red flags in order to run a nuclear reactor.

All I am worried about is covering my own ass and making sure all judgements/decisions that aren't by the book can be blamed on someone else in the event that something goes wrong.

You know in the case of failure...potholes vs nuclear reactor meltdown....certainly a large difference. :)

User avatar
Swirls
gone fission
Posts: 8299
Joined: December 11 07, 4:15 pm
Location: South Korea

Re: Rant: Heat Transfer

Post by Swirls »

AWvsCBsteeeerike3 wrote:
Swirls wrote:It's not so much that we have to take the refresher course that is annoying and aggravating. What's aggravating is that we do these courses over like 2-3 days. We sit in a classroom for two days while an instructor cruises through 300 PowerPoint slides, then we have to review the slides and a 300 page student guide before our exam the next morning. You get under an 80%, you fail.

What's more frustrating is that since Constellation Energy operates a fleet of nuclear plants (Nine Mile Point in Oswego, NY, R.E. Ginna in Rochester, NY, and Calvert Cliffs in Lusby, MD), each plant site had their own method for presenting this training to their new engineers. So my class is a pilot session where they will change the teaching method for each course, and then they'll use our classes feedback to determine how to set up a common training program for all three nuclear sites.

So we'll go from having all PowerPoint slides to having no slides and a huge student handbook to having nothing but an online review and exam to having all three. It makes it very hard to come to a common way of studying, because it is always changing.

In college, you learn how to tweak your study habits/schedule based on how your instructor teaches. Sometimes it may take a few weeks or a month to finally get in the groove on how said professor teaches the information, but after that you're set for the rest of the semester and any other time you have that professor for another class. Mine is always changing. Plus it doesn't help that half of our courses are taught by an instructor, the other half are taught by subject matter experts for each system that have no clue at all on how to teach.
Yeah, regarding the study habits/how you learn, that's certainly true. I was just giving you [expletive] that you were pissed about having to get a 90% without drawing red flags in order to run a nuclear reactor.

All I am worried about is covering my own ass and making sure all judgements/decisions that aren't by the book can be blamed on someone else in the event that something goes wrong.

You know in the case of failure...potholes vs nuclear reactor meltdown....certainly a large difference. :)
Bah, the reactor runs itself. My dog Oscar could run the plant if it was set up to be bark-activated. In the event of an accident, do you know how many safety systems we have that are automatically initiated? Like 10.

Low Pressure Coolant Injection
High Pressure Coolant Injection
Low Pressure Core Spray
High Pressure Core Spray
Automatic Depressurization System
Reactor Core Isolation Cooling
Containment Spray
Suppression Pool Cooling
Spent Fuel Pool Cooling
Shutdown Cooling
Emergency Condensers

User avatar
Swirls
gone fission
Posts: 8299
Joined: December 11 07, 4:15 pm
Location: South Korea

Re: Rant: Heat Transfer

Post by Swirls »

Well I passed the exam. We have a half hour break, and then we get materials engineering for the rest of the day. Our exam for that is first thing Monday morning.

Only another month of this [expletive]. Thank God.

User avatar
cards2468
Hall Of Famer
Posts: 14745
Joined: October 28 06, 11:10 pm
Location: LOVE IT OR LEAVE IT

Re: Rant: Heat Transfer

Post by cards2468 »

Swirls wrote:Well I passed the exam. We have a half hour break, and then we get materials engineering for the rest of the day. Our exam for that is first thing Monday morning.

Only another month of this [expletive]. Thank God.
Congrats

I'm already scheduled to travel for some training mainly based around acquisition and systems engineering, but today I applied for courses on Composite Airframe Structures, Airframe Stress Analysis and Sizing, and Corrosion of Aging Aircraft.

Post Reply